Here is version 21.
In the "min(x,y)" function at the end of the script, the "less than
or equal to" symbol did not translate correctly when it appeared in
the previous post. This is now fixed.

Steve

(*
Script to pipe selected Apple Mail messages to Yojimbo notes

Author: Steve Samuels (samplerx@[Protected])
File: yojimbo21.txt
PipeMailtoYojimbo.scpt

Version:21
Date: 2007/04/16

Besides importing messages, the script:

* Adds to message Comments:
1) the date sent (yyyy/mm/dd)
2) the name or address of sender or recipient
3) the first 60 characters of the message itself it, after
removing returns, tabs, and most extra spaces.
* Adds tags: "email" & either "in" or "out"

After running the script, a Comment will look something like:

"2007/04/08 <: NYTimes.com---Your subscription is up soon. Please
rene" (an incoming message)
or
"2007/04/09 >: Sam---Hi, Sam! I can't believe that you won the
lotte" (an outgoing message)

Notes:

1. Text will not import for some rich text messages with
attachments. The date sent, sender & tags are added, but
AppleScript's "content of message" function returns only variants of
"??". If this happens, open the original message & cut & paste the
content into the note created by the script.

2. Graphics are removed and replaced by question marks. If you wish
to retain the graphics, import the mail via the "Save PDF to Yojimbo"
option in Mail's Print window.

3. A message is classified as outgoing if the sender's address
matches one of the user's addresses. If an account has been deleted,
there is no address to match, and all messages in the account will be
classified as incoming. To fix this behavior, create and inactivate a
dummy account. Only the email address must be correct; the other
settings are irrelevant.

4. You can reset the number of characters that are added to comments
from the body of the message. The setting statement appears just
after the "on run" command at the start of the script proper.

5. If you have selected messages in more than one Message Viewer, the
script transfers only those from the Viewer that was opened first.

6. Changing the font of Yojimbo's item list may make the the list
more readable. (I now use Lucinda-Grande Bold 11)


Acknowledgements:

The original form for this script was based on MailtoYojimbo, by Jim
Correia of Bare Bones Software, posted in the Yojimbo Talk Forum:
http://www.listsearch.com/Yojimbo/Message/index.lasso?2169
& at //www.hawkwings.net/2006/09/04/script-to-pipe-emails-into-yojimbo/

I got the idea for adding extended message information to the
comments field after seeing the "Summary" field in SOHO Notes.

The error dialog was copied from MailToYojimbo-v1.1 by Drummond
Field, posted at
http://www.hawkwings.net/2007/02/05/email-to-yojimbo-script-with-pdf-
support

The source for the minimum function was:
http://www.macresearch.org/no_need_to_parse_an_expression

The form for the shell script was based on examples at:
http://developer.apple.com/technotes/tn2002/tn2065.html
http://developer.apple.com/documentation/OpenSource/Conceptual/
ShellScripting/RegularExpressionsUnfettered/chapter_6_section_9.html
*)

on run
----------------------------------------------------------
--In the "set _maxcontent" statement below, specify how many characters
--from the message to add to comments. Zero is a possible value.
----------------------------------------------------------
set _maxcontent to 60 as integer
tell application "Yojimbo"
activate
end tell
tell application "Mail"
activate
if not (exists message viewer 1) then
display dialog "No Viewer Window is Open. Open one & select
messages." & return with title "Error...." giving up after 3 with icon 0
return
end if
tell message viewer 1
if not (exists selected messages) then
display dialog "No message was selected" & return & "Transfer
cancelled." with title "Error..." giving up after 3 with icon 0
return
end if
set messageList to selected messages
--Now loop through messages
repeat with m in messageList
--Initialize
set _type to ""
set _contents to ""
set _name to ""
set _person to ""
set _tag to ""
set _body to ""
--Classify message as incoming or outgoing
set _count to my CountSent(m) as integer
if _count is 1 then
set _type to "outgoing"
else
set _type to "incoming"
end if
set _name to subject of m
set _contents to _contents & my generateMessageText(m)
--Set up date sent
set _date to date sent of m
set _yr to year of _date as string
set _month to month of _date as number
--Force month to format 'mm'
set _smon to _month as string
if _month < 10 then
set _smon to "0" & _smon
end if
--Force day to format 'dd'
set _day to day of _date as string
if day of _date < 10 then
set _day to "0" & _day
end if
-- Create date sent with yyyy/mm/dd format
set _datef to _yr & "/" & _smon & "/" & _day
--Get sender's name or address
set _sender to extract name from sender of m
--If there is no name, _sender defaults to the address
--If the message was received, set the name to the sender
-- and set a tag variable to "in"
if _type is "incoming" then
set _person to "<: " & _sender
set _tag to "in" as string
end if
--If the message was sent, get the first recipient's name, if
available, otherwise the address
if _type is "outgoing" then
set theRecipients to to recipients of m
if (exists name of item 1 of theRecipients) then
set _person to ">: " & name of item 1 of theRecipients
else
set _person to ">: " & address of item 1 of theRecipients
end if
set _tag to "out" as string
end if
--Get message body to add to contents
set _body to ""
set _body to _body & content of m as text
set _length to length of _body
set _shorttext to ""
if _maxcontent > 0 then
set _allow to my min(_length, _maxcontent + 20)
--allow for spaces that will be replaced
set _toomuch to get text 1 thru _allow of _body
-- Pass the message content to Perl to remove tabs, returns, & extra
spaces
--
--WARNING: DO NOT JOIN THE FOLLOWING TWO LINES! THEY CONTAIN HIDDEN
TAB & RETURN CHARACTERS.
set _text1 to do shell script "echo " & quoted form of _toomuch & " |
perl -e \"while(\\$line = <STDIN>) {-e \\$line =~ s/[\t\r]+/ /g ;
print \\$line; }\" | perl -e \"while(\\$line = <STDIN>) {-e \\$line
=~ s/ +/ /g ; print \\$line; }\""

--Now find the maximum length of the content to be added
set _lengthnow to length of _text1
set _most to my min(_lengthnow, _maxcontent)
set _shorttext to get text 1 through _most of _text1
set _shorttext to "---" & _shorttext
end if
---Now set up the note with body, comments, and tags.
tell application "Yojimbo"
set aNewNoteItem to make new note item with properties
{contents:_contents, name:_name, comments:_datef & " " & _person &
_shorttext}
add tags {"email", _tag} to aNewNoteItem
end tell
end repeat
end tell
end tell
end run

-- Function routines follow


--Set up a function to generate the body of the message (by Jim Correia)
on generateMessageText(m)
tell application "Mail"
set _sender to sender of m
set _subject to subject of m
set _date to date received of m as string
set _contents to content of m
set _messageString to "From: " & _sender & return
set _messageString to _messageString & "Subject: " & _subject & return
set _messageString to _messageString & "Date: " & _date & return
set _messageString to _messageString & return & return & _contents
end tell
end generateMessageText

--Function to pass a variable which indicates whether I sent the
message or not
--
on CountSent(m)
tell application "Mail"
set _saddr to extract address from sender of m
set _ctsent to 0 as integer
repeat with _acct in accounts
if email addresses of _acct contains _saddr then
set _ctsent to _ctsent + 1 as integer
-- _ctsent counts the number of times the sender's address matches
one of mine
-- At the end of the function, the value of _ctsent will be 0 or 1
end if
end repeat
end tell
return _ctsent
end CountSent


--Source: http://www.macresearch.org/no_need_to_parse_an_expression
on min(x, y)
if (x is less than y) then
return x
else
return y
end if
end min


(*
Script to pipe selected Apple Mail messages to Yojimbo notes

Author: Steve Samuels (samplerx@[Protected])
File: yojimbo21.txt
PipeMailtoYojimbo.scpt

Version:21
Date: 2007/04/16

Besides importing messages, the script:

* Adds to message Comments:
1) the date sent (yyyy/mm/dd)
2) the name or address of sender or recipient
3) the first 60 characters of the message itself it, after
removing returns, tabs, and most extra spaces.
* Adds tags: "email" & either "in" or "out"

After running the script, a Comment will look something like:

"2007/04/08 <: NYTimes.com---Your subscription is up soon. Please
rene" (an incoming message)
or
"2007/04/09 >: Sam---Hi, Sam! I can't believe that you won the
lotte" (an outgoing message)

Notes:

1. Text will not import for some rich text messages with
attachments. The date sent, sender & tags are added, but
AppleScript's "content of message" function returns only variants of
"??". If this happens, open the original message & cut & paste the
content into the note created by the script.

2. Graphics are removed and replaced by question marks. If you wish
to retain the graphics, import the mail via the "Save PDF to Yojimbo"
option in Mail's Print window.

3. A message is classified as outgoing if the sender's address
matches one of the user's addresses. If an account has been deleted,
there is no address to match, and all messages in the account will be
classified as incoming. To fix this behavior, create and inactivate a
dummy account. Only the email address must be correct; the other
settings are irrelevant.

4. You can reset the number of characters that are added to comments
from the body of the message. The setting statement appears just
after the "on run" command at the start of the script proper.

5. If you have selected messages in more than one Message Viewer, the
script transfers only those from the Viewer that was opened first.

6. Changing the font of Yojimbo's item list may make the the list
more readable. (I now use Lucinda-Grande Bold 11)


Acknowledgements:

The original form for this script was based on MailtoYojimbo, by Jim
Correia of Bare Bones Software, posted in the Yojimbo Talk Forum:
http://www.listsearch.com/Yojimbo/Message/index.lasso?2169
& at //www.hawkwings.net/2006/09/04/script-to-pipe-emails-into-yojimbo/

I got the idea for adding extended message information to the
comments field after seeing the "Summary" field in SOHO Notes.

The error dialog was copied from MailToYojimbo-v1.1 by Drummond
Field, posted at
http://www.hawkwings.net/2007/02/05/email-to-yojimbo-script-with-pdf-
support

The source for the minimum function was:
http://www.macresearch.org/no_need_to_parse_an_expression

The form for the shell script was based on examples at:
http://developer.apple.com/technotes/tn2002/tn2065.html
http://developer.apple.com/documentation/OpenSource/Conceptual/
ShellScripting/RegularExpressionsUnfettered/chapter_6_section_9.html
*)

on run
----------------------------------------------------------
--In the "set _maxcontent" statement below, specify how many characters
--from the message to add to comments. Zero is a possible value.
----------------------------------------------------------
set _maxcontent to 60 as integer
tell application "Yojimbo"
activate
end tell
tell application "Mail"
activate
if not (exists message viewer 1) then
display dialog "No Viewer Window is Open. Open one & select
messages." & return with title "Error...." giving up after 3 with icon 0
return
end if
tell message viewer 1
if not (exists selected messages) then
display dialog "No message was selected" & return & "Transfer
cancelled." with title "Error..." giving up after 3 with icon 0
return
end if
set messageList to selected messages
--Now loop through messages
repeat with m in messageList
--Initialize
set _type to ""
set _contents to ""
set _name to ""
set _person to ""
set _tag to ""
set _body to ""
--Classify message as incoming or outgoing
set _count to my CountSent(m) as integer
if _count is 1 then
set _type to "outgoing"
else
set _type to "incoming"
end if
set _name to subject of m
set _contents to _contents & my generateMessageText(m)
--Set up date sent
set _date to date sent of m
set _yr to year of _date as string
set _month to month of _date as number
--Force month to format 'mm'
set _smon to _month as string
if _month < 10 then
set _smon to "0" & _smon
end if
--Force day to format 'dd'
set _day to day of _date as string
if day of _date < 10 then
set _day to "0" & _day
end if
-- Create date sent with yyyy/mm/dd format
set _datef to _yr & "/" & _smon & "/" & _day
--Get sender's name or address
set _sender to extract name from sender of m
--If there is no name, _sender defaults to the address
--If the message was received, set the name to the sender
-- and set a tag variable to "in"
if _type is "incoming" then
set _person to "<: " & _sender
set _tag to "in" as string
end if
--If the message was sent, get the first recipient's name, if
available, otherwise the address
if _type is "outgoing" then
set theRecipients to to recipients of m
if (exists name of item 1 of theRecipients) then
set _person to ">: " & name of item 1 of theRecipients
else
set _person to ">: " & address of item 1 of theRecipients
end if
set _tag to "out" as string
end if
--Get message body to add to contents
set _body to ""
set _body to _body & content of m as text
set _length to length of _body
set _shorttext to ""
if _maxcontent > 0 then
set _allow to my min(_length, _maxcontent + 20)
--allow for spaces that will be replaced
set _toomuch to get text 1 thru _allow of _body
-- Pass the message content to Perl to remove tabs, returns, & extra
spaces
--
--WARNING: DO NOT JOIN THE FOLLOWING TWO LINES! THEY CONTAIN HIDDEN
TAB & RETURN CHARACTERS.
set _text1 to do shell script "echo " & quoted form of _toomuch & " |
perl -e \"while(\\$line = <STDIN>) {-e \\$line =~ s/[\t\r]+/ /g ;
print \\$line; }\" | perl -e \"while(\\$line = <STDIN>) {-e \\$line
=~ s/ +/ /g ; print \\$line; }\""

--Now find the maximum length of the content to be added
set _lengthnow to length of _text1
set _most to my min(_lengthnow, _maxcontent)
set _shorttext to get text 1 through _most of _text1
set _shorttext to "---" & _shorttext
end if
---Now set up the note with body, comments, and tags.
tell application "Yojimbo"
set aNewNoteItem to make new note item with properties
{contents:_contents, name:_name, comments:_datef & " " & _person &
_shorttext}
add tags {"email", _tag} to aNewNoteItem
end tell
end repeat
end tell
end tell
end run

-- Function routines follow


--Set up a function to generate the body of the message (by Jim Correia)
on generateMessageText(m)
tell application "Mail"
set _sender to sender of m
set _subject to subject of m
set _date to date received of m as string
set _contents to content of m
set _messageString to "From: " & _sender & return
set _messageString to _messageString & "Subject: " & _subject & return
set _messageString to _messageString & "Date: " & _date & return
set _messageString to _messageString & return & return & _contents
end tell
end generateMessageText

--Function to pass a variable which indicates whether I sent the
message or not
--
on CountSent(m)
tell application "Mail"
set _saddr to extract address from sender of m
set _ctsent to 0 as integer
repeat with _acct in accounts
if email addresses of _acct contains _saddr then
set _ctsent to _ctsent + 1 as integer
-- _ctsent counts the number of times the sender's address matches
one of mine
-- At the end of the function, the value of _ctsent will be 0 or 1
end if
end repeat
end tell
return _ctsent
end CountSent


--Source: http://www.macresearch.org/no_need_to_parse_an_expression
on min(x, y)
if (x is less than or equal to y) then
return x
else
return y
end if
end min




--
----------------------------------------------------------
This message is sent to you because you are subscribed to
the mailing list <yojimbo-talk@[Protected]>.
To unsubscribe, send mail to: <yojimbo-talk-off@[Protected]>
List archives: <http://www.listsearch.com/yojimbotalk.lasso>
Have a feature request, or not sure if the software's working
correctly? Please send mail to: <support@[Protected]>

This is a test. The Yojimbo-Talk web page is breaking up long lines
with hard returns, so that users who copy the script from there
experience errors. To try to prevent the problem, I have tried
breaking up long lines with Applescript continuation characters.

Steve

(*
Script to pipe selected Apple Mail messages to Yojimbo notes

Author: Steve Samuels (samplerx@[Protected])
File: yojimbo22.txt
PipeMailtoYojimbo.scpt

Version:22
Date: 2007/04/16

This script is based on one by Jim Correia of Barebones, cited
below. It adds the following information to to the "Comments" of an
imported email note. If the comments Column is visible in Yojimbo's
Item List Pane, then the information can be viewed without opening
the note.


* Added to Comments
1) the date sent (yyyy/mm/dd)
2) the name or address of sender or recipient
3) the first 60 characters of the message itself it, after
removing returns, tabs, and most extra spaces.

* Adds tags: "email" & either "in" or "out"

After running the script, a Comment will look something like:

"2007/04/08 <: NYTimes.com---Your subscription is up soon. Please
rene" (an incoming message)
or
"2007/04/09 >: Sam---Hi, Sam! I can't believe that you won the
lotte" (an outgoing message)

Notes:

IMPORTANT: Before inserting the script into script-editor, open it in
a text editor like BBEdit or Text Wrangler. Scroll down to a section

1. Text will not import for some rich text messages with
attachments. The date sent, sender & tags are added, but
AppleScript's "content of message" function returns only variants of
"??". If this happens, open the original message & cut & paste the
content into the note created by the script.

2. Graphics are removed and replaced by question marks. If you wish
to retain the graphics, import the mail via the "Save PDF to Yojimbo"
option in Mail's Print window.

3. A message is classified as outgoing if the sender's address
matches one of the user's addresses. If an account has been deleted,
there is no address to match, and all messages in the account will be
classified as incoming. To fix this behavior, create and inactivate a
dummy account. Only the email address must be correct; the other
settings are irrelevant.

4. You can reset the number of characters that are added to comments
from the body of the message. The setting statement appears just
after the "on run" command at the start of the script proper.

5. If you have selected messages in more than one Message Viewer, the
script transfers only those from the Viewer that was opened first.

6. Changing the font of Yojimbo's item list may make the the list
more readable. (I now use Lucinda-Grande Bold 11)


Acknowledgements:

The original form for this script was based on MailtoYojimbo, by Jim
Correia of Bare Bones Software, posted in the Yojimbo Talk Forum:
http://www.listsearch.com/Yojimbo/Message/index.lasso?2169
& at //www.hawkwings.net/2006/09/04/script-to-pipe-emails-into-yojimbo/

I got the idea for adding extended message information to the
comments field after seeing the "Summary" field in SOHO Notes.

The error dialog was copied from MailToYojimbo-v1.1 by Drummond
Field, posted at
http://www.hawkwings.net/2007/02/05/email-to-yojimbo-script-with-pdf-
support

The source for the minimum function was:
http://www.macresearch.org/no_need_to_parse_an_expression

The form for the shell script was based on examples at:
http://developer.apple.com/technotes/tn2002/tn2065.html
http://developer.apple.com/documentation/OpenSource/Conceptual/
ShellScripting/RegularExpressionsUnfettered/chapter_6_section_9.html
*)

on run
----------------------------------------------------------
--In the "set _maxcontent" statement below, specify how many characters
--from the message to add to comments. Zero is a possible value.
----------------------------------------------------------
set _maxcontent to 60 as integer
tell application "Yojimbo"
activate
end tell
tell application "Mail"
activate
if not (exists message viewer 1) then
display dialog ¬
"No Viewer Window is Open. Open one & select messages."¬
& return with title "Error...."¬
giving up after 3 with icon 0
return
end if
tell message viewer 1
if not (exists selected messages) then
display dialog "No message was selected" ¬
& return & "Transfer cancelled." with title "Error..."¬
giving up after 3 with icon 0
return
end if
set messageList to selected messages
--Now loop through messages
repeat with m in messageList
--Initialize
set _type to ""
set _contents to ""
set _name to ""
set _person to ""
set _tag to ""
set _body to ""
--Classify message as incoming or outgoing
set _count to my CountSent(m) as integer
if _count is 1 then
set _type to "outgoing"
else
set _type to "incoming"
end if
set _name to subject of m
set _contents to _contents & my generateMessageText(m)
--Set up date sent
set _date to date sent of m
set _yr to year of _date as string
set _month to month of _date as number
--Force month to format 'mm'
set _smon to _month as string
if _month < 10 then
set _smon to "0" & _smon
end if
--Force day to format 'dd'
set _day to day of _date as string
if day of _date < 10 then
set _day to "0" & _day
end if
-- Create date sent with yyyy/mm/dd format
set _datef to _yr & "/" & _smon & "/" & _day
--Get sender's name or address
set _sender to extract name from sender of m
--If there is no name, _sender defaults to the address
--If the message was received, set the name to the sender
-- and set a tag variable to "in"
if _type is "incoming" then
set _person to "<: " & _sender
set _tag to "in" as string
end if
--If the message was sent, get the first recipient's name,
--if available, otherwise the address
if _type is "outgoing" then
set theRecipients to to recipients of m
if (exists name of item 1 of theRecipients) then
set _person to ">: " & name of item 1 of theRecipients
else
set _person to ">: " & address of item 1 of theRecipients
end if
set _tag to "out" as string
end if
--Get message body to add to contents
set _body to ""
set _body to _body & content of m as text
set _length to length of _body
set _shorttext to ""
if _maxcontent > 0 then
set _allow to my min(_length, _maxcontent + 20)
--allow for spaces that will be replaced
set _toomuch to get text 1 thru _allow of _body
-- Pass the message content to Perl to remove tabs,
-- returns, & extra spaces
--
--JOIN THE LINES IN THE NEXT SECTION (BETWEEN) IN A TEXT EDITOR
--BEFORE INSERTING THEM INTO SCRIPT EDITOR
-- **********************************************************
set _text1 to do shell script ¬
"echo " & quoted form of _toomuch & ¬
"| perl -e \"while(\\$line = <STDIN>) {-e \\$line =~ s/[\t\r]+/ /g ;"¬
& "print \\$line; }\"" & ¬
"| perl -e \"while(\\$line = <STDIN>) {-e \\$line =~ s/ +/ /g ; " ¬
& "print \\$line; }\""
----**********************************************************

--Now find the maximum length of the content to be added
set _lengthnow to length of _text1
set _most to my min(_lengthnow, _maxcontent)
set _shorttext to get text 1 through _most of _text1
set _shorttext to "---" & _shorttext
end if
---Now set up the note with body, comments, and tags.
tell application "Yojimbo"
set aNewNote to make new note item with properties¬
{contents:_contents, name:_name,¬
comments:_datef & " " & _person & _shorttext}
add tags {"email", _tag} to aNewNote
end tell
end repeat
end tell
end tell
end run

-- Function routines follow


--Set up a function to generate the body of the message (by Jim Correia)
on generateMessageText(m)
tell application "Mail"
set _sender to sender of m
set _subject to subject of m
set _date to date received of m as string
set _contents to content of m
set _messageString to "From: " & _sender & return
set _messageString to _messageString & "Subject: " & _subject & return
set _messageString to _messageString & "Date: " & _date & return
set _messageString to _messageString & return & return & _contents
end tell
end generateMessageText

--Function to pass a variable which indicates
--whether I sent the message or not
--
on CountSent(m)
tell application "Mail"
set _saddr to extract address from sender of m
set _ctsent to 0 as integer
repeat with _acct in accounts
if email addresses of _acct contains _saddr then
set _ctsent to _ctsent + 1 as integer
-- _ctsent counts the number of times the sender's
-- address matches one of mine (0 or 1)
end if
end repeat
end tell
return _ctsent
end CountSent


on min(x, y)
if (x is less than or equal to y) then
return x
else
return y
end if
end min




--
----------------------------------------------------------
This message is sent to you because you are subscribed to
the mailing list <yojimbo-talk@[Protected]>.
To unsubscribe, send mail to: <yojimbo-talk-off@[Protected]>
List archives: <http://www.listsearch.com/yojimbotalk.lasso>
Have a feature request, or not sure if the software's working
correctly? Please send mail to: <support@[Protected]>

Version 22

1. The Yojimbo-Talk web page i breaks up long lines with hard
returns. This caused errors for users who copied previous versions of
the script from there. To fix this problem, I broke up long lines
with Applescript continuation characters "¬". The error did not
affect anyone who copied the script from their email.

2. The post of Version of 21 had two copies of the script and should
therefore be replaced.

Steve

(*
Script to pipe selected Apple Mail messages to Yojimbo notes

Author: Steve Samuels (samplerx@[Protected])
File: yojimbo22.txt
PipeMailtoYojimbo.scpt

Version:22
Reformatted to shorter lines
Date: 2007/04/16

This script is based on one by Jim Correia of Barebones, cited
below. It adds the following information to to the "Comments" of an
imported email note. If the comments Column is visible in Yojimbo's
Item List Pane, then the information can be viewed without opening
the note.


* Added to Comments
1) the date sent (yyyy/mm/dd)
2) the name or address of sender or recipient
3) the first 60 characters of the message itself it, after
removing returns, tabs, and most extra spaces.

* Adds tags: "email" & either "in" or "out"

After running the script, a Comment will look something like:

"2007/04/08 <: NYTimes.com---Your subscription is up soon. Please
rene" (an incoming message)
or
"2007/04/09 >: Sam---Hi, Sam! I can't believe that you won the
lotte" (an outgoing message)

Notes:

IMPORTANT: Before inserting the script into script-editor, open it in
a text editor like BBEdit or Text Wrangler. Scroll down to a section

1. Text will not import for some rich text messages with
attachments. The date sent, sender & tags are added, but
AppleScript's "content of message" function returns only variants of
"??". If this happens, open the original message & cut & paste the
content into the note created by the script.

2. Graphics are removed and replaced by question marks. If you wish
to retain the graphics, import the mail via the "Save PDF to Yojimbo"
option in Mail's Print window.

3. A message is classified as outgoing if the sender's address
matches one of the user's addresses. If an account has been deleted,
there is no address to match, and all messages in the account will be
classified as incoming. To fix this behavior, create and inactivate a
dummy account. Only the email address must be correct; the other
settings are irrelevant.

4. You can reset the number of characters that are added to comments
from the body of the message. The setting statement appears just
after the "on run" command at the start of the script proper.

5. If you have selected messages in more than one Message Viewer, the
script transfers only those from the Viewer that was opened first.

6. Changing the font of Yojimbo's item list may make the the list
more readable. (I now use Lucinda-Grande Bold 11)


Acknowledgements:

The original form for this script was based on MailtoYojimbo, by Jim
Correia of Bare Bones Software, posted in the Yojimbo Talk Forum:
http://www.listsearch.com/Yojimbo/Message/index.lasso?2169
& at //www.hawkwings.net/2006/09/04/script-to-pipe-emails-into-yojimbo/

I got the idea for adding extended message information to the
comments field after seeing the "Summary" field in SOHO Notes.

The error dialog was copied from MailToYojimbo-v1.1 by Drummond
Field, posted at
http://www.hawkwings.net/2007/02/05/email-to-yojimbo-script-with-pdf-
support

The source for the minimum function was:
http://www.macresearch.org/no_need_to_parse_an_expression

The form for the shell script was based on examples at:
http://developer.apple.com/technotes/tn2002/tn2065.html
http://developer.apple.com/documentation/OpenSource/Conceptual/
ShellScripting/RegularExpressionsUnfettered/chapter_6_section_9.html
*)

on run
----------------------------------------------------------
--In the "set _maxcontent" statement below, specify how many characters
--from the message to add to comments. Zero is a possible value.
----------------------------------------------------------
set _maxcontent to 60 as integer
tell application "Yojimbo"
activate
end tell
tell application "Mail"
activate
if not (exists message viewer 1) then
display dialog ¬
"No Viewer Window is Open. Open one & select messages."¬
& return with title "Error...."¬
giving up after 3 with icon 0
return
end if
tell message viewer 1
if not (exists selected messages) then
display dialog "No message was selected" ¬
& return & "Transfer cancelled." with title "Error..."¬
giving up after 3 with icon 0
return
end if
set messageList to selected messages
--Now loop through messages
repeat with m in messageList
--Initialize
set _type to ""
set _contents to ""
set _name to ""
set _person to ""
set _tag to ""
set _body to ""
--Classify message as incoming or outgoing
set _count to my CountSent(m) as integer
if _count is 1 then
set _type to "outgoing"
else
set _type to "incoming"
end if
set _name to subject of m
set _contents to _contents & my generateMessageText(m)
--Set up date sent
set _date to date sent of m
set _yr to year of _date as string
set _month to month of _date as number
--Force month to format 'mm'
set _smon to _month as string
if _month < 10 then
set _smon to "0" & _smon
end if
--Force day to format 'dd'
set _day to day of _date as string
if day of _date < 10 then
set _day to "0" & _day
end if
-- Create date sent with yyyy/mm/dd format
set _datef to _yr & "/" & _smon & "/" & _day
--Get sender's name or address
set _sender to extract name from sender of m
--If there is no name, _sender defaults to the address
--If the message was received, set the name to the sender
-- and set a tag variable to "in"
if _type is "incoming" then
set _person to "<: " & _sender
set _tag to "in" as string
end if
--If the message was sent, get the first recipient's name,
--if available, otherwise the address
if _type is "outgoing" then
set theRecipients to to recipients of m
if (exists name of item 1 of theRecipients) then
set _person to ">: " & name of item 1 of theRecipients
else
set _person to ">: " & address of item 1 of theRecipients
end if
set _tag to "out" as string
end if
--Get message body to add to contents
set _body to ""
set _body to _body & content of m as text
set _length to length of _body
set _shorttext to ""
if _maxcontent > 0 then
set _allow to my min(_length, _maxcontent + 20)
--allow for spaces that will be replaced
set _toomuch to get text 1 thru _allow of _body
-- Pass the message content to Perl to remove tabs,
-- returns, & extra spaces
--
--JOIN THE LINES IN THE NEXT SECTION (BETWEEN) IN A TEXT EDITOR
--BEFORE INSERTING THEM INTO SCRIPT EDITOR
-- **********************************************************
set _text1 to do shell script ¬
"echo " & quoted form of _toomuch & ¬
"| perl -e \"while(\\$line = <STDIN>) {-e \\$line =~ s/[\t\r]+/ /g ;"¬
& "print \\$line; }\"" & ¬
"| perl -e \"while(\\$line = <STDIN>) {-e \\$line =~ s/ +/ /g ; " ¬
& "print \\$line; }\""
----**********************************************************

--Now find the maximum length of the content to be added
set _lengthnow to length of _text1
set _most to my min(_lengthnow, _maxcontent)
set _shorttext to get text 1 through _most of _text1
set _shorttext to "---" & _shorttext
end if
---Now set up the note with body, comments, and tags.
tell application "Yojimbo"
set aNewNote to make new note item with properties¬
{contents:_contents, name:_name,¬
comments:_datef & " " & _person & _shorttext}
add tags {"email", _tag} to aNewNote
end tell
end repeat
end tell
end tell
end run

-- Function routines follow


--Set up a function to generate the body of the message (by Jim Correia)
on generateMessageText(m)
tell application "Mail"
set _sender to sender of m
set _subject to subject of m
set _date to date received of m as string
set _contents to content of m
set _messageString to "From: " & _sender & return
set _messageString to _messageString & "Subject: " & _subject & return
set _messageString to _messageString & "Date: " & _date & return
set _messageString to _messageString & return & return & _contents
end tell
end generateMessageText

--Function to pass a variable which indicates
--whether I sent the message or not
--
on CountSent(m)
tell application "Mail"
set _saddr to extract address from sender of m
set _ctsent to 0 as integer
repeat with _acct in accounts
if email addresses of _acct contains _saddr then
set _ctsent to _ctsent + 1 as integer
-- _ctsent counts the number of times the sender's
-- address matches one of mine (0 or 1)
end if
end repeat
end tell
return _ctsent
end CountSent


on min(x, y)
if (x is less than or equal to y) then
return x
else
return y
end if
end min




--
----------------------------------------------------------
This message is sent to you because you are subscribed to
the mailing list <yojimbo-talk@[Protected]>.
To unsubscribe, send mail to: <yojimbo-talk-off@[Protected]>
List archives: <http://www.listsearch.com/yojimbotalk.lasso>
Have a feature request, or not sure if the software's working
correctly? Please send mail to: <support@[Protected]>

I'm really beginning to lose track of versions here. Maybe some
testing, and then some kind of a "final" version until a major
addition to the script comes along?

On Apr 16, 2007, at 9:56 AM, Steven Samuels wrote:

> Version 22

--
Sherman



--
----------------------------------------------------------
This message is sent to you because you are subscribed to
the mailing list <yojimbo-talk@[Protected]>.
To unsubscribe, send mail to: <yojimbo-talk-off@[Protected]>
List archives: <http://www.listsearch.com/yojimbotalk.lasso>
Have a feature request, or not sure if the software's working
correctly? Please send mail to: <support@[Protected]>

Version 23. In Version 22 left in unnecessary instructions about
joining lines that had been separated by hard returns. These
instructions are removed There are no changes in function.

Steve

(*
Script to pipe selected Apple Mail messages to Yojimbo notes

Author: Steve Samuels (samplerx@[Protected])
File: yojimbo23.txt
PipeMailtoYojimbo.scpt

Version:23
Date: 2007/04/16

This script is based on one by Jim Correia of Barebones, cited
below. It adds the following information to to the "Comments" of an
imported email note. If the comments Column is visible in Yojimbo's
Item List Pane, then the information can be viewed without opening
the note.

* Added to Comments
1) the date sent (yyyy/mm/dd)
2) the name or address of sender or recipient
3) the first 60 characters of the message itself it, after
removing returns, tabs, and most extra spaces.

* Adds tags: "email" & either "in" or "out"

After running the script, a Comment will look something like:

"2007/04/08 <: NYTimes.com---Your subscription is up soon. Please
rene" (an incoming message)
or
"2007/04/09 >: Sam---Hi, Sam! I can't believe that you won the
lotte" (an outgoing message)

Notes:

1. Text will not import for some rich text messages with
attachments. The date sent, sender & tags are added, but
AppleScript's "content of message" function returns only variants of
"??". If this happens, open the original message & cut & paste the
content into the note created by the script.

2. Graphics are removed and replaced by question marks. If you wish
to retain the graphics, import the mail via the "Save PDF to Yojimbo"
option in Mail's Print window.

3. A message is classified as outgoing if the sender's address
matches one of the user's addresses. If an account has been deleted,
there is no address to match, and all messages in the account will be
classified as incoming. To fix this behavior, create and inactivate a
dummy account. Only the email address must be correct; the other
settings are irrelevant.

4. You can reset the number of characters that are added to comments
from the body of the message. The setting statement appears just
after the "on run" command at the start of the script proper.

5. If you have selected messages in more than one Message Viewer, the
script transfers only those from the Viewer that was opened first.

6. Changing the font of Yojimbo's item list may make the the list
more readable. (I now use Lucinda-Grande Bold 11)

Acknowledgements:

The original form for this script was based on MailtoYojimbo, by Jim
Correia of Bare Bones Software, posted in the Yojimbo Talk Forum:
http://www.listsearch.com/Yojimbo/Message/index.lasso?2169
& at //www.hawkwings.net/2006/09/04/script-to-pipe-emails-into-yojimbo/

I got the idea for adding extended message information to the
comments field after seeing the "Summary" field in SOHO Notes.

The error dialog was copied from MailToYojimbo-v1.1 by Drummond
Field, posted at
http://www.hawkwings.net/2007/02/05/email-to-yojimbo-script-with-pdf-
support

The source for the minimum function was:
http://www.macresearch.org/no_need_to_parse_an_expression

The form for the shell script was based on examples at:
http://developer.apple.com/technotes/tn2002/tn2065.html
http://developer.apple.com/documentation/OpenSource/Conceptual/
ShellScripting/RegularExpressionsUnfettered/chapter_6_section_9.html
*)

on run
----------------------------------------------------------
--In the "set _maxcontent" statement below, specify how many characters
--from the message to add to comments. Zero is a possible value.
----------------------------------------------------------
set _maxcontent to 60 as integer
tell application "Yojimbo"
activate
end tell
tell application "Mail"
activate
if not (exists message viewer 1) then
display dialog ¬
"No Viewer Window is Open. Open one & select messages."¬
& return with title "Error...."¬
giving up after 3 with icon 0
return
end if
tell message viewer 1
if not (exists selected messages) then
display dialog "No message was selected" ¬
& return & "Transfer cancelled." with title "Error..."¬
giving up after 3 with icon 0
return
end if
set messageList to selected messages
--Now loop through messages
repeat with m in messageList
--Initialize
set _type to ""
set _contents to ""
set _name to ""
set _person to ""
set _tag to ""
set _body to ""
--Classify message as incoming or outgoing
set _count to my CountSent(m) as integer
if _count is 1 then
set _type to "outgoing"
else
set _type to "incoming"
end if
set _name to subject of m
set _contents to _contents & my generateMessageText(m)
--Set up date sent
set _date to date sent of m
set _yr to year of _date as string
set _month to month of _date as number
--Force month to format 'mm'
set _smon to _month as string
if _month < 10 then
set _smon to "0" & _smon
end if
--Force day to format 'dd'
set _day to day of _date as string
if day of _date < 10 then
set _day to "0" & _day
end if
-- Create date sent with yyyy/mm/dd format
set _datef to _yr & "/" & _smon & "/" & _day
--Get sender's name or address
set _sender to extract name from sender of m
--If there is no name, _sender defaults to the address
--If the message was received, set the name to the sender
-- and set a tag variable to "in"
if _type is "incoming" then
set _person to "<: " & _sender
set _tag to "in" as string
end if
--If the message was sent, get the first recipient's name,
--if available, otherwise the address
if _type is "outgoing" then
set theRecipients to to recipients of m
if (exists name of item 1 of theRecipients) then
set _person to ">: " & name of item 1 of theRecipients
else
set _person to ">: " & address of item 1 of theRecipients
end if
set _tag to "out" as string
end if
--Get message body to add to contents
set _body to ""
set _body to _body & content of m as text
set _length to length of _body
set _shorttext to ""
if _maxcontent > 0 then
set _allow to my min(_length, _maxcontent + 20)
--allow for spaces that will be replaced
set _toomuch to get text 1 thru _allow of _body
--
-- Set shell script to remove tabs, returns, extra spaces
-- **********************************************************
set _text1 to do shell script ¬
"echo " & quoted form of _toomuch & ¬
"| perl -e \"while(\\$line = <STDIN>) {-e \\$line =~ s/[\t\r]+/ /g ;"¬
& "print \\$line; }\"" & ¬
"| perl -e \"while(\\$line = <STDIN>) {-e \\$line =~ s/ +/ /g ; " ¬
& "print \\$line; }\""
---**********************************************************

--Now find the maximum length of the content to be added
set _lengthnow to length of _text1
set _most to my min(_lengthnow, _maxcontent)
set _shorttext to get text 1 through _most of _text1
set _shorttext to "---" & _shorttext
end if
---Now set up the note with body, comments, and tags.
tell application "Yojimbo"
set aNewNote to make new note item with properties¬
{contents:_contents, name:_name,¬
comments:_datef & " " & _person & _shorttext}
add tags {"email", _tag} to aNewNote
end tell
end repeat
end tell
end tell
end run

-- Function routines follow

--Set up a function to generate the body of the message
--(by Jim Correia)
on generateMessageText(m)
tell application "Mail"
set _sender to sender of m
set _subject to subject of m
set _date to date received of m as string
set _contents to content of m
set _messageString to "From: " & _sender & return
set _messageString to _messageString & "Subject: " & _subject & return
set _messageString to _messageString & "Date: " & _date & return
set _messageString to _messageString & return & return & _contents
end tell
end generateMessageText

--Function to pass a variable which indicates
--whether I sent the message or not
--
on CountSent(m)
tell application "Mail"
set _saddr to extract address from sender of m
set _ctsent to 0 as integer
repeat with _acct in accounts
if email addresses of _acct contains _saddr then
set _ctsent to _ctsent + 1 as integer
-- _ctsent counts the number of times the sender's
-- address matches one of mine (0 or 1)
end if
end repeat
end tell
return _ctsent
end CountSent

on min(x, y)
if (x is less than or equal to y) then
return x
else
return y
end if
end min



--
----------------------------------------------------------
This message is sent to you because you are subscribed to
the mailing list <yojimbo-talk@[Protected]>.
To unsubscribe, send mail to: <yojimbo-talk-off@[Protected]>
List archives: <http://www.listsearch.com/yojimbotalk.lasso>
Have a feature request, or not sure if the software's working
correctly? Please send mail to: <support@[Protected]>

Might also be worth while putting this up on a web site rather than
spamming the list with changes / etc

Nice to know its being developed / etc .... but perhaps this isn't
quite the right place for the change logs / etc ?

Suggestion

Setup some web space where the script can be downloaded from
Setup an announce list on that site for people who are interested to
subscribe
send update announcements to the announce list when new full
releases come out
maybe setup a beta list for testers?
perhaps setup a paypal account for donations from those who feel
they find the script useful?


On 16 Apr 2007, at 17:05, Sherman Wilcox wrote:

> I'm really beginning to lose track of versions here. Maybe some
> testing, and then some kind of a "final" version until a major
> addition to the script comes along?
>
> On Apr 16, 2007, at 9:56 AM, Steven Samuels wrote:
>
>> Version 22
>
> --
> Sherman
>
>
>
> --
> ----------------------------------------------------------
> This message is sent to you because you are subscribed to
> the mailing list <yojimbo-talk@[Protected]>.
> To unsubscribe, send mail to: <yojimbo-talk-off@[Protected]>
> List archives: <http://www.listsearch.com/yojimbotalk.lasso>
> Have a feature request, or not sure if the software's
> workingcorrectly? Please send mail to: <support@[Protected]>



--
Jon Morby
FidoNet Registration Services Ltd
tel: 0845 004 3050 / fax: 0845 004 3051
web: http://www.fido.net/



--
----------------------------------------------------------
This message is sent to you because you are subscribed to
the mailing list <yojimbo-talk@[Protected]>.
To unsubscribe, send mail to: <yojimbo-talk-off@[Protected]>
List archives: <http://www.listsearch.com/yojimbotalk.lasso>
Have a feature request, or not sure if the software's working
correctly? Please send mail to: <support@[Protected]>

Version 23. In Version 22 left in unnecessary instructions about
joining lines that had been separated by hard returns. These
instructions are removed There are no changes in function.

Steve

(*
Script to pipe selected Apple Mail messages to Yojimbo notes

Author: Steve Samuels (samplerx@[Protected])
File: yojimbo23.txt
PipeMailtoYojimbo.scpt

Version:23
Date: 2007/04/16

This script is based on one by Jim Correia of Barebones, cited
below. It adds the following information to to the "Comments" of an
imported email note. If the comments Column is visible in Yojimbo's
Item List Pane, then the information can be viewed without opening
the note.

* Added to Comments
1) the date sent (yyyy/mm/dd)
2) the name or address of sender or recipient
3) the first 60 characters of the message itself it, after
removing returns, tabs, and most extra spaces.

* Adds tags: "email" & either "in" or "out"

After running the script, a Comment will look something like:

"2007/04/08 <: NYTimes.com---Your subscription is up soon. Please
rene" (an incoming message)
or
"2007/04/09 >: Sam---Hi, Sam! I can't believe that you won the
lotte" (an outgoing message)

Notes:

1. Text will not import for some rich text messages with
attachments. The date sent, sender & tags are added, but
AppleScript's "content of message" function returns only variants of
"??". If this happens, open the original message & cut & paste the
content into the note created by the script.

2. Graphics are removed and replaced by question marks. If you wish
to retain the graphics, import the mail via the "Save PDF to Yojimbo"
option in Mail's Print window.

3. A message is classified as outgoing if the sender's address
matches one of the user's addresses. If an account has been deleted,
there is no address to match, and all messages in the account will be
classified as incoming. To fix this behavior, create and inactivate a
dummy account. Only the email address must be correct; the other
settings are irrelevant.

4. You can reset the number of characters that are added to comments
from the body of the message. The setting statement appears just
after the "on run" command at the start of the script proper.

5. If you have selected messages in more than one Message Viewer, the
script transfers only those from the Viewer that was opened first.

6. Changing the font of Yojimbo's item list may make the the list
more readable. (I now use Lucinda-Grande Bold 11)

Acknowledgements:

The original form for this script was based on MailtoYojimbo, by Jim
Correia of Bare Bones Software, posted in the Yojimbo Talk Forum:
http://www.listsearch.com/Yojimbo/Message/index.lasso?2169
& at //www.hawkwings.net/2006/09/04/script-to-pipe-emails-into-yojimbo/

I got the idea for adding extended message information to the
comments field after seeing the "Summary" field in SOHO Notes.

The error dialog was copied from MailToYojimbo-v1.1 by Drummond
Field, posted at
http://www.hawkwings.net/2007/02/05/email-to-yojimbo-script-with-pdf-
support

The source for the minimum function was:
http://www.macresearch.org/no_need_to_parse_an_expression

The form for the shell script was based on examples at:
http://developer.apple.com/technotes/tn2002/tn2065.html
http://developer.apple.com/documentation/OpenSource/Conceptual/
ShellScripting/RegularExpressionsUnfettered/chapter_6_section_9.html
*)

on run
----------------------------------------------------------
--In the "set _maxcontent" statement below, specify how many characters
--from the message to add to comments. Zero is a possible value.
----------------------------------------------------------
set _maxcontent to 60 as integer
tell application "Yojimbo"
activate
end tell
tell application "Mail"
activate
if not (exists message viewer 1) then
display dialog ¬
"No Viewer Window is Open. Open one & select messages."¬
& return with title "Error...."¬
giving up after 3 with icon 0
return
end if
tell message viewer 1
if not (exists selected messages) then
display dialog "No message was selected" ¬
& return & "Transfer cancelled." with title "Error..."¬
giving up after 3 with icon 0
return
end if
set messageList to selected messages
--Now loop through messages
repeat with m in messageList
--Initialize
set _type to ""
set _contents to ""
set _name to ""
set _person to ""
set _tag to ""
set _body to ""
--Classify message as incoming or outgoing
set _count to my CountSent(m) as integer
if _count is 1 then
set _type to "outgoing"
else
set _type to "incoming"
end if
set _name to subject of m
set _contents to _contents & my generateMessageText(m)
--Set up date sent
set _date to date sent of m
set _yr to year of _date as string
set _month to month of _date as number
--Force month to format 'mm'
set _smon to _month as string
if _month < 10 then
set _smon to "0" & _smon
end if
--Force day to format 'dd'
set _day to day of _date as string
if day of _date < 10 then
set _day to "0" & _day
end if
-- Create date sent with yyyy/mm/dd format
set _datef to _yr & "/" & _smon & "/" & _day
--Get sender's name or address
set _sender to extract name from sender of m
--If there is no name, _sender defaults to the address
--If the message was received, set the name to the sender
-- and set a tag variable to "in"
if _type is "incoming" then
set _person to "<: " & _sender
set _tag to "in" as string
end if
--If the message was sent, get the first recipient's name,
--if available, otherwise the address
if _type is "outgoing" then
set theRecipients to to recipients of m
if (exists name of item 1 of theRecipients) then
set _person to ">: " & name of item 1 of theRecipients
else
set _person to ">: " & address of item 1 of theRecipients
end if
set _tag to "out" as string
end if
--Get message body to add to contents
set _body to ""
set _body to _body & content of m as text
set _length to length of _body
set _shorttext to ""
if _maxcontent > 0 then
set _allow to my min(_length, _maxcontent + 20)
--allow for spaces that will be replaced
set _toomuch to get text 1 thru _allow of _body
--
-- Set shell script to remove tabs, returns, extra spaces
-- **********************************************************
set _text1 to do shell script ¬
"echo " & quoted form of _toomuch & ¬
"| perl -e \"while(\\$line = <STDIN>) {-e \\$line =~ s/[\t\r]+/ /g ;"¬
& "print \\$line; }\"" & ¬
"| perl -e \"while(\\$line = <STDIN>) {-e \\$line =~ s/ +/ /g ; " ¬
& "print \\$line; }\""
---**********************************************************

--Now find the maximum length of the content to be added
set _lengthnow to length of _text1
set _most to my min(_lengthnow, _maxcontent)
set _shorttext to get text 1 through _most of _text1
set _shorttext to "---" & _shorttext
end if
---Now set up the note with body, comments, and tags.
tell application "Yojimbo"
set aNewNote to make new note item with properties¬
{contents:_contents, name:_name,¬
comments:_datef & " " & _person & _shorttext}
add tags {"email", _tag} to aNewNote
end tell
end repeat
end tell
end tell
end run

-- Function routines follow

--Set up a function to generate the body of the message
--(by Jim Correia)
on generateMessageText(m)
tell application "Mail"
set _sender to sender of m
set _subject to subject of m
set _date to date received of m as string
set _contents to content of m
set _messageString to "From: " & _sender & return
set _messageString to _messageString & "Subject: " & _subject & return
set _messageString to _messageString & "Date: " & _date & return
set _messageString to _messageString & return & return & _contents
end tell
end generateMessageText

--Function to pass a variable which indicates
--whether I sent the message or not
--
on CountSent(m)
tell application "Mail"
set _saddr to extract address from sender of m
set _ctsent to 0 as integer
repeat with _acct in accounts
if email addresses of _acct contains _saddr then
set _ctsent to _ctsent + 1 as integer
-- _ctsent counts the number of times the sender's
-- address matches one of mine (0 or 1)
end if
end repeat
end tell
return _ctsent
end CountSent

on min(x, y)
if (x is less than or equal to y) then
return x
else
return y
end if
end min



--
----------------------------------------------------------
This message is sent to you because you are subscribed to
the mailing list <yojimbo-talk@[Protected]>.
To unsubscribe, send mail to: <yojimbo-talk-off@[Protected]>
List archives: <http://www.listsearch.com/yojimbotalk.lasso>
Have a feature request, or not sure if the software's working
correctly? Please send mail to: <support@[Protected]>

I agree, I'm having a hard time following things. I can provide some
web-space if Steve would like. Let me know and I'll reply off-list if
you are interested.

rgds,
verdon

On 17-Apr-07, at 5:07 AM, Yojimbo-Talk List wrote:

> Nice to know its being developed / etc .... but perhaps this isn't
> quite the right place for the change logs / etc ?
>
> Suggestion
>
> Setup some web space where the script can be downloaded from
> Setup an announce list on that site for people who are interested to
> subscribe
> send update announcements to the announce list when new full
> releases come out
> maybe setup a beta list for testers?
> perhaps setup a paypal account for donations from those who feel
> they find the script useful?


--
----------------------------------------------------------
This message is sent to you because you are subscribed to
the mailing list <yojimbo-talk@[Protected]>.
To unsubscribe, send mail to: <yojimbo-talk-off@[Protected]>
List archives: <http://www.listsearch.com/yojimbotalk.lasso>
Have a feature request, or not sure if the software's working
correctly? Please send mail to: <support@[Protected]>

Thank you, Verdon. I very much appreciate the offer.

Steve
On Apr 17, 2007, at 5:33 AM, Verdon Vaillancourt wrote:

> I agree, I'm having a hard time following things. I can provide
> some web-space if Steve would like. Let me know and I'll reply off-
> list if you are interested.
>
> rgds,
> verdon


--
----------------------------------------------------------
This message is sent to you because you are subscribed to
the mailing list <yojimbo-talk@[Protected]>.
To unsubscribe, send mail to: <yojimbo-talk-off@[Protected]>
List archives: <http://www.listsearch.com/yojimbotalk.lasso>
Have a feature request, or not sure if the software's working
correctly? Please send mail to: <support@[Protected]>