I have an issue that Mysql will not start on my local machine. I noticed a
few days ago on a restart that I got an error saying that Mysqld had
encountered a problem and had to close. I did not pay any attention to it
because I was not working in it for a bit.

I then tried to start it today and got the same error message saying
mysqld.exe has encountered a problem and had to close.

+ Apache 2.2.11
+ MySQL 5.1.30 (Community Server)
+ PHP 5.2.8 + PEAR (Support for PHP 4 has been discontinued)
+ PHP-Switch win32 1.0 (use "php-switch.bat" in the xampp main directory)
+ XAMPP Control Version 2.5 from www.nat32.com
+ XAMPP Security 1.0
+ SQLite 2.8.15
+ OpenSSL 0.9.8i
+ phpMyAdmin 3.1.1
+ ADOdb 4.990
+ Mercury Mail Transport System v4.52
+ FileZilla FTP Server 0.9.29
+ Webalizer 2.01-10
+ Zend Optimizer 3.3.0
+ eAccelerator 0.9.5.3 fr PHP 5.2.8 (but not activated in the php.ini)

Anyone have an idea to where I should start to look?

Thanks

Gary



--
MySQL General Mailing List
For list archives: http://lists.mysql.com/mysql
To unsubscribe: http://lists.mysql.com/mysql?unsub=archiver@[Protected]

You have to take a look on the error log, a file named hostname.err
(hostname=your machine name) and should be located inside
the mysql dir on the xammp dir.
That file will give an insight about the problem, or you can post the
error here to get help.

Carlos


On 7/11/2009 11:52 AM, Gary wrote:
> I have an issue that Mysql will not start on my local machine. I noticed a
> few days ago on a restart that I got an error saying that Mysqld had
> encountered a problem and had to close. I did not pay any attention to it
> because I was not working in it for a bit.
>
> I then tried to start it today and got the same error message saying
> mysqld.exe has encountered a problem and had to close.
>
> + Apache 2.2.11
> + MySQL 5.1.30 (Community Server)
> + PHP 5.2.8 + PEAR (Support for PHP 4 has been discontinued)
> + PHP-Switch win32 1.0 (use "php-switch.bat" in the xampp main directory)
> + XAMPP Control Version 2.5 from www.nat32.com
> + XAMPP Security 1.0
> + SQLite 2.8.15
> + OpenSSL 0.9.8i
> + phpMyAdmin 3.1.1
> + ADOdb 4.990
> + Mercury Mail Transport System v4.52
> + FileZilla FTP Server 0.9.29
> + Webalizer 2.01-10
> + Zend Optimizer 3.3.0
> + eAccelerator 0.9.5.3 fr PHP 5.2.8 (but not activated in the php.ini)
>
> Anyone have an idea to where I should start to look?
>
> Thanks
>
> Gary
>
>
>
>


--
MySQL General Mailing List
For list archives: http://lists.mysql.com/mysql
To unsubscribe: http://lists.mysql.com/mysql?unsub=archiver@[Protected]

Not sure if this is it, it was the only .err file that I have. Also this
seems to be the latest entry that has a date.

Thanks for your help.

Gary

090617 21:50:45 - mysqld got exception 0xc0000005 ;
This could be because you hit a bug. It is also possible that this binary
or one of the libraries it was linked against is corrupt, improperly built,
or misconfigured. This error can also be caused by malfunctioning hardware.
We will try our best to scrape up some info that will hopefully help
diagnose
the problem, but since we have already crashed, something is definitely
wrong
and this may fail.

key_buffer_size=16777216
read_buffer_size=262144
max_used_connections=0
max_threads=151
threads_connected=0
It is possible that mysqld could use up to
key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 133305
K
bytes of memory
Hope that's ok; if not, decrease some variables in the equation.

thd: 0x0
Attempting backtrace. You can use the following information to find out
where mysqld died. If you see no messages after this, something went
terribly wrong...
006B8853 mysqld.exe!???
The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains
information that should help you find out what is causing the crash.
090627 9:35:07 - mysqld got exception 0xc0000005 ;
This could be because you hit a bug. It is also possible that this binary
or one of the libraries it was linked against is corrupt, improperly built,
or misconfigured. This error can also be caused by malfunctioning hardware.
We will try our best to scrape up some info that will hopefully help
diagnose
the problem, but since we have already crashed, something is definitely
wrong
and this may fail.
"Carlos Proal" <carlos.proal@[Protected]> wrote in message
news:4A58C79B.2090503@[Protected]
>
>
> You have to take a look on the error log, a file named hostname.err
> (hostname=your machine name) and should be located inside
> the mysql dir on the xammp dir.
> That file will give an insight about the problem, or you can post the
> error here to get help.
>
> Carlos
>
>
> On 7/11/2009 11:52 AM, Gary wrote:
>> I have an issue that Mysql will not start on my local machine. I noticed
>> a
>> few days ago on a restart that I got an error saying that Mysqld had
>> encountered a problem and had to close. I did not pay any attention to it
>> because I was not working in it for a bit.
>>
>> I then tried to start it today and got the same error message saying
>> mysqld.exe has encountered a problem and had to close.
>>
>> + Apache 2.2.11
>> + MySQL 5.1.30 (Community Server)
>> + PHP 5.2.8 + PEAR (Support for PHP 4 has been discontinued)
>> + PHP-Switch win32 1.0 (use "php-switch.bat" in the xampp main
>> directory)
>> + XAMPP Control Version 2.5 from www.nat32.com
>> + XAMPP Security 1.0
>> + SQLite 2.8.15
>> + OpenSSL 0.9.8i
>> + phpMyAdmin 3.1.1
>> + ADOdb 4.990
>> + Mercury Mail Transport System v4.52
>> + FileZilla FTP Server 0.9.29
>> + Webalizer 2.01-10
>> + Zend Optimizer 3.3.0
>> + eAccelerator 0.9.5.3 fr PHP 5.2.8 (but not activated in the php.ini)
>>
>> Anyone have an idea to where I should start to look?
>>
>> Thanks
>>
>> Gary
>>
>>
>>
>>
>



--
MySQL General Mailing List
For list archives: http://lists.mysql.com/mysql
To unsubscribe: http://lists.mysql.com/mysql?unsub=archiver@[Protected]

Take a look on the my.ini to see if there is something wrong (maybe a
path pointing to a missing place or memory setting bigger than your
actual RAM)

Carlos

On 7/11/2009 12:17 PM, Gary wrote:
> Not sure if this is it, it was the only .err file that I have. Also this
> seems to be the latest entry that has a date.
>
> Thanks for your help.
>
> Gary
>
> 090617 21:50:45 - mysqld got exception 0xc0000005 ;
> This could be because you hit a bug. It is also possible that this binary
> or one of the libraries it was linked against is corrupt, improperly built,
> or misconfigured. This error can also be caused by malfunctioning hardware.
> We will try our best to scrape up some info that will hopefully help
> diagnose
> the problem, but since we have already crashed, something is definitely
> wrong
> and this may fail.
>
> key_buffer_size=16777216
> read_buffer_size=262144
> max_used_connections=0
> max_threads=151
> threads_connected=0
> It is possible that mysqld could use up to
> key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 133305
> K
> bytes of memory
> Hope that's ok; if not, decrease some variables in the equation.
>
> thd: 0x0
> Attempting backtrace. You can use the following information to find out
> where mysqld died. If you see no messages after this, something went
> terribly wrong...
> 006B8853 mysqld.exe!???
> The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains
> information that should help you find out what is causing the crash.
> 090627 9:35:07 - mysqld got exception 0xc0000005 ;
> This could be because you hit a bug. It is also possible that this binary
> or one of the libraries it was linked against is corrupt, improperly built,
> or misconfigured. This error can also be caused by malfunctioning hardware.
> We will try our best to scrape up some info that will hopefully help
> diagnose
> the problem, but since we have already crashed, something is definitely
> wrong
> and this may fail.
> "Carlos Proal" <carlos.proal@[Protected]> wrote in message
> news:4A58C79B.2090503@[Protected]
>
>> You have to take a look on the error log, a file named hostname.err
>> (hostname=your machine name) and should be located inside
>> the mysql dir on the xammp dir.
>> That file will give an insight about the problem, or you can post the
>> error here to get help.
>>
>> Carlos
>>
>>
>> On 7/11/2009 11:52 AM, Gary wrote:
>>
>>> I have an issue that Mysql will not start on my local machine. I noticed
>>> a
>>> few days ago on a restart that I got an error saying that Mysqld had
>>> encountered a problem and had to close. I did not pay any attention to it
>>> because I was not working in it for a bit.
>>>
>>> I then tried to start it today and got the same error message saying
>>> mysqld.exe has encountered a problem and had to close.
>>>
>>> + Apache 2.2.11
>>> + MySQL 5.1.30 (Community Server)
>>> + PHP 5.2.8 + PEAR (Support for PHP 4 has been discontinued)
>>> + PHP-Switch win32 1.0 (use "php-switch.bat" in the xampp main
>>> directory)
>>> + XAMPP Control Version 2.5 from www.nat32.com
>>> + XAMPP Security 1.0
>>> + SQLite 2.8.15
>>> + OpenSSL 0.9.8i
>>> + phpMyAdmin 3.1.1
>>> + ADOdb 4.990
>>> + Mercury Mail Transport System v4.52
>>> + FileZilla FTP Server 0.9.29
>>> + Webalizer 2.01-10
>>> + Zend Optimizer 3.3.0
>>> + eAccelerator 0.9.5.3 fr PHP 5.2.8 (but not activated in the php.ini)
>>>
>>> Anyone have an idea to where I should start to look?
>>>
>>> Thanks
>>>
>>> Gary
>>>
>>>
>>>
>>>
>>>
>
>
>
>


--
MySQL General Mailing List
For list archives: http://lists.mysql.com/mysql
To unsubscribe: http://lists.mysql.com/mysql?unsub=archiver@[Protected]

I dont see anything wrong, but then again I may not know wht to look for,
this is the my.ini file

# Example MySQL config file for small systems.
#
# This is for a system with little memory (<= 64M) where MySQL is only used
# from time to time and it's important that the mysqld daemon
# doesn't use much resources.
#
# You can copy this file to
# C:/xampp/mysql/bin/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is C:/xampp/mysql/data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
# password = removed
port = 3306
socket = "C:/xampp/mysql/mysql.sock"

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
port= 3306
socket= "C:/xampp/mysql/mysql.sock"
basedir="C:/xampp/mysql"
tmpdir="C:/xampp/tmp"
datadir="C:/xampp/mysql/data"
skip-locking
key_buffer = 16M
max_allowed_packet = 1M
table_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M



# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
# commented in by lampp security
#skip-networking
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
# log-bin deactivated by default since XAMPP 1.4.11
#log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin


# Point the following paths to different dedicated disks
#tmpdir = "C:/xampp/tmp"
#log-update = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000

# Comment the following if you are using InnoDB tables
#skip-innodb
innodb_data_home_dir = "C:/xampp/mysql/"
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = "C:/xampp/mysql/"
#innodb_log_arch_dir = "C:/xampp/mysql/"
## You can set .._buffer_pool_size up to 50 - 80 %
## of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 16M
innodb_additional_mem_pool_size = 2M
## Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 5M
innodb_log_buffer_size = 8M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout
[WinMySQLAdmin]
QueryInterval=10

"Carlos Proal" <carlos.proal@[Protected]> wrote in message
news:4A58CB7C.4090503@[Protected]
>
> Take a look on the my.ini to see if there is something wrong (maybe a path
> pointing to a missing place or memory setting bigger than your actual RAM)
>
> Carlos
>
> On 7/11/2009 12:17 PM, Gary wrote:
>> Not sure if this is it, it was the only .err file that I have. Also this
>> seems to be the latest entry that has a date.
>>
>> Thanks for your help.
>>
>> Gary
>>
>> 090617 21:50:45 - mysqld got exception 0xc0000005 ;
>> This could be because you hit a bug. It is also possible that this binary
>> or one of the libraries it was linked against is corrupt, improperly
>> built,
>> or misconfigured. This error can also be caused by malfunctioning
>> hardware.
>> We will try our best to scrape up some info that will hopefully help
>> diagnose
>> the problem, but since we have already crashed, something is definitely
>> wrong
>> and this may fail.
>>
>> key_buffer_size=16777216
>> read_buffer_size=262144
>> max_used_connections=0
>> max_threads=151
>> threads_connected=0
>> It is possible that mysqld could use up to
>> key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads =
>> 133305 K
>> bytes of memory
>> Hope that's ok; if not, decrease some variables in the equation.
>>
>> thd: 0x0
>> Attempting backtrace. You can use the following information to find out
>> where mysqld died. If you see no messages after this, something went
>> terribly wrong...
>> 006B8853 mysqld.exe!???
>> The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html
>> contains
>> information that should help you find out what is causing the crash.
>> 090627 9:35:07 - mysqld got exception 0xc0000005 ;
>> This could be because you hit a bug. It is also possible that this binary
>> or one of the libraries it was linked against is corrupt, improperly
>> built,
>> or misconfigured. This error can also be caused by malfunctioning
>> hardware.
>> We will try our best to scrape up some info that will hopefully help
>> diagnose
>> the problem, but since we have already crashed, something is definitely
>> wrong
>> and this may fail.
>> "Carlos Proal" <carlos.proal@[Protected]> wrote in message
>> news:4A58C79B.2090503@[Protected]
>>
>>> You have to take a look on the error log, a file named hostname.err
>>> (hostname=your machine name) and should be located inside
>>> the mysql dir on the xammp dir.
>>> That file will give an insight about the problem, or you can post the
>>> error here to get help.
>>>
>>> Carlos
>>>
>>>
>>> On 7/11/2009 11:52 AM, Gary wrote:
>>>
>>>> I have an issue that Mysql will not start on my local machine. I
>>>> noticed a
>>>> few days ago on a restart that I got an error saying that Mysqld had
>>>> encountered a problem and had to close. I did not pay any attention to
>>>> it
>>>> because I was not working in it for a bit.
>>>>
>>>> I then tried to start it today and got the same error message saying
>>>> mysqld.exe has encountered a problem and had to close.
>>>>
>>>> + Apache 2.2.11
>>>> + MySQL 5.1.30 (Community Server)
>>>> + PHP 5.2.8 + PEAR (Support for PHP 4 has been discontinued)
>>>> + PHP-Switch win32 1.0 (use "php-switch.bat" in the xampp main
>>>> directory)
>>>> + XAMPP Control Version 2.5 from www.nat32.com
>>>> + XAMPP Security 1.0
>>>> + SQLite 2.8.15
>>>> + OpenSSL 0.9.8i
>>>> + phpMyAdmin 3.1.1
>>>> + ADOdb 4.990
>>>> + Mercury Mail Transport System v4.52
>>>> + FileZilla FTP Server 0.9.29
>>>> + Webalizer 2.01-10
>>>> + Zend Optimizer 3.3.0
>>>> + eAccelerator 0.9.5.3 fr PHP 5.2.8 (but not activated in the
>>>> php.ini)
>>>>
>>>> Anyone have an idea to where I should start to look?
>>>>
>>>> Thanks
>>>>
>>>> Gary
>>>>
>>>>
>>>>
>>>>
>>>>
>>
>>
>>
>>
>



--
MySQL General Mailing List
For list archives: http://lists.mysql.com/mysql
To unsubscribe: http://lists.mysql.com/mysql?unsub=archiver@[Protected]

BTW, this is the error message that windows wanted to send to MS

C:\DOCUME~1\GARYPA~1\LOCALS~1\Temp\WERd238.dir00\mysqld.exe.mdmp

C:\DOCUME~1\GARYPA~1\LOCALS~1\Temp\WERd238.dir00\appcompat.txt

"Carlos Proal" <carlos.proal@[Protected]> wrote in message
news:4A58CB7C.4090503@[Protected]
>
> Take a look on the my.ini to see if there is something wrong (maybe a path
> pointing to a missing place or memory setting bigger than your actual RAM)
>
> Carlos
>
> On 7/11/2009 12:17 PM, Gary wrote:
>> Not sure if this is it, it was the only .err file that I have. Also this
>> seems to be the latest entry that has a date.
>>
>> Thanks for your help.
>>
>> Gary
>>
>> 090617 21:50:45 - mysqld got exception 0xc0000005 ;
>> This could be because you hit a bug. It is also possible that this binary
>> or one of the libraries it was linked against is corrupt, improperly
>> built,
>> or misconfigured. This error can also be caused by malfunctioning
>> hardware.
>> We will try our best to scrape up some info that will hopefully help
>> diagnose
>> the problem, but since we have already crashed, something is definitely
>> wrong
>> and this may fail.
>>
>> key_buffer_size=16777216
>> read_buffer_size=262144
>> max_used_connections=0
>> max_threads=151
>> threads_connected=0
>> It is possible that mysqld could use up to
>> key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads =
>> 133305 K
>> bytes of memory
>> Hope that's ok; if not, decrease some variables in the equation.
>>
>> thd: 0x0
>> Attempting backtrace. You can use the following information to find out
>> where mysqld died. If you see no messages after this, something went
>> terribly wrong...
>> 006B8853 mysqld.exe!???
>> The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html
>> contains
>> information that should help you find out what is causing the crash.
>> 090627 9:35:07 - mysqld got exception 0xc0000005 ;
>> This could be because you hit a bug. It is also possible that this binary
>> or one of the libraries it was linked against is corrupt, improperly
>> built,
>> or misconfigured. This error can also be caused by malfunctioning
>> hardware.
>> We will try our best to scrape up some info that will hopefully help
>> diagnose
>> the problem, but since we have already crashed, something is definitely
>> wrong
>> and this may fail.
>> "Carlos Proal" <carlos.proal@[Protected]> wrote in message
>> news:4A58C79B.2090503@[Protected]
>>
>>> You have to take a look on the error log, a file named hostname.err
>>> (hostname=your machine name) and should be located inside
>>> the mysql dir on the xammp dir.
>>> That file will give an insight about the problem, or you can post the
>>> error here to get help.
>>>
>>> Carlos
>>>
>>>
>>> On 7/11/2009 11:52 AM, Gary wrote:
>>>
>>>> I have an issue that Mysql will not start on my local machine. I
>>>> noticed a
>>>> few days ago on a restart that I got an error saying that Mysqld had
>>>> encountered a problem and had to close. I did not pay any attention to
>>>> it
>>>> because I was not working in it for a bit.
>>>>
>>>> I then tried to start it today and got the same error message saying
>>>> mysqld.exe has encountered a problem and had to close.
>>>>
>>>> + Apache 2.2.11
>>>> + MySQL 5.1.30 (Community Server)
>>>> + PHP 5.2.8 + PEAR (Support for PHP 4 has been discontinued)
>>>> + PHP-Switch win32 1.0 (use "php-switch.bat" in the xampp main
>>>> directory)
>>>> + XAMPP Control Version 2.5 from www.nat32.com
>>>> + XAMPP Security 1.0
>>>> + SQLite 2.8.15
>>>> + OpenSSL 0.9.8i
>>>> + phpMyAdmin 3.1.1
>>>> + ADOdb 4.990
>>>> + Mercury Mail Transport System v4.52
>>>> + FileZilla FTP Server 0.9.29
>>>> + Webalizer 2.01-10
>>>> + Zend Optimizer 3.3.0
>>>> + eAccelerator 0.9.5.3 fr PHP 5.2.8 (but not activated in the
>>>> php.ini)
>>>>
>>>> Anyone have an idea to where I should start to look?
>>>>
>>>> Thanks
>>>>
>>>> Gary
>>>>
>>>>
>>>>
>>>>
>>>>
>>
>>
>>
>>
>



--
MySQL General Mailing List
For list archives: http://lists.mysql.com/mysql
To unsubscribe: http://lists.mysql.com/mysql?unsub=archiver@[Protected]

I'm sorry for the delay in thanking those that offered help, I have not been
able to look at this problem for a day or so, but thank you. And Thank you
Martin for your note.

I have not backed up anything on this, however it was really just a practice
run, so I will not really lose anything, but a very good lesson. I did find
a file that had all of the databases in it, I wonder if I copy all of those
if I would be able to save whatever DB's I had.

Thanks again and if anyone thinks of anything new, I would love to hear it.

Gary


""Gary"" <gwpaul@[Protected]> wrote in message
news:20090711165227.4655.qmail@[Protected]
>I have an issue that Mysql will not start on my local machine. I noticed a
> few days ago on a restart that I got an error saying that Mysqld had
> encountered a problem and had to close. I did not pay any attention to it
> because I was not working in it for a bit.
>
> I then tried to start it today and got the same error message saying
> mysqld.exe has encountered a problem and had to close.
>
> + Apache 2.2.11
> + MySQL 5.1.30 (Community Server)
> + PHP 5.2.8 + PEAR (Support for PHP 4 has been discontinued)
> + PHP-Switch win32 1.0 (use "php-switch.bat" in the xampp main directory)
> + XAMPP Control Version 2.5 from www.nat32.com
> + XAMPP Security 1.0
> + SQLite 2.8.15
> + OpenSSL 0.9.8i
> + phpMyAdmin 3.1.1
> + ADOdb 4.990
> + Mercury Mail Transport System v4.52
> + FileZilla FTP Server 0.9.29
> + Webalizer 2.01-10
> + Zend Optimizer 3.3.0
> + eAccelerator 0.9.5.3 fr PHP 5.2.8 (but not activated in the php.ini)
>
> Anyone have an idea to where I should start to look?
>
> Thanks
>
> Gary
>
>
>
> __________ Information from ESET Smart Security, version of virus
> signature database 4241 (20090714) __________
>
> The message was checked by ESET Smart Security.
>
> http://www.eset.com
>
>
>



__________ Information from ESET Smart Security, version of virus signature database 4241 (20090714) __________

The message was checked by ESET Smart Security.

http://www.eset.com





--
MySQL General Mailing List
For list archives: http://lists.mysql.com/mysql
To unsubscribe: http://lists.mysql.com/mysql?unsub=archiver@[Protected]